November 16, 2026
Keep Flies and Mosquitoes Out While Enjoying Fresh Air
By @theecohomeguide
Understanding the Challenge of an Open Window
Opening a window is one of the simplest ways to cool a room and bring in fresh air. But the moment you slide it up, the world outside comes in too: house flies buzzing near the fruit bowl, mosquitoes hunting for a warm meal, wasps investigating the light. The common solution is to close the window, but that defeats the purpose. A better approach is to fit a mesh barrier that lets the breeze through while stopping insects. Retractable flyscreens are a practical answer for anyone who wants natural ventilation without the bugs.
What to Look for in an Insect Barrier
Not all mesh is the same. A good insect barrier needs to be fine enough to block mosquitoes and tiny midges while still allowing a full view and good airflow. Fibreglass mesh is a common choice because it resists corrosion and does not sag over time. The frame holding it should fit snugly into the window opening or door frame, leaving no gaps. Even a small gap the size of a pencil eraser is enough for a wasp to squeeze through or for mosquitoes to find their way in. Retractable flyscreens are designed to solve exactly this problem, offering a custom fit that seals the opening completely.
Step 1: Measure Your Window or Door Opening
Before anything else, you need the exact dimensions of the space you plan to cover. Use a steel tape measure, not a cloth one, for accuracy. Measure the width at the top, middle and bottom of the frame. Do the same for the height. Take the smallest width and the smallest height as your working numbers. This ensures the screen will fit without having to force it into place. Write these numbers down and check them twice. A screen that is too wide will buckle; one that is too narrow will leave gaps. Many suppliers, including gozito.co.uk, offer made to measure retractable flyscreens, so you can order a screen that matches your measurements exactly. The key here is precision: even a few millimetres off can create a space that insects will exploit.
Watch for obstructions: window handles, hinges, or locks that stick out. The screen frame needs to sit flush against the opening, so anything that protrudes will affect the fit. If your window has a handle that sticks out, you may need a screen with a deeper frame or a spacer. Measure the depth of the frame as well to ensure the screen will not block the window from closing fully.

Step 2: Choose the Right Mesh Type
Mesh is rated by its aperture size, usually measured in millimetres. For mosquitoes and small flies, you want an aperture of about 1.2 mm or smaller. House flies are larger, but they can still squeeze through a 2 mm gap. A 1.2 mm mesh also blocks most midges and some of the smallest gnats. Wasps are bigger and easier to stop, but they can chew through some plastic meshes if the screen is not well tensioned. Fibreglass mesh is tougher and more resistant to wasp damage than standard polyester. It also holds its shape better in direct sunlight, so it does not stretch or sag over time. If you live in an area with strong sunlight, fibreglass is the better choice.
Colour matters too. Black mesh gives the clearest view through the screen, while white or grey can be more visible from the outside. If the window is in a prominent place, black mesh is usually the most discreet. Some people prefer white for a cleaner look against white frames. There is no wrong choice here, but it is worth thinking about how the screen will look from both inside and outside the house.
Step 3: Fit the Frame and Track System
Retractable flyscreens come with a housing cassette that sits at the top of the window or door opening, and two side tracks that guide the mesh down. The cassette holds the rolled mesh and a spring mechanism that keeps the mesh taut. Start by fixing the cassette to the top of the frame. Use the screws provided, and make sure the cassette is level. If the cassette is not level, the mesh will not track straight and may jam. Drill pilot holes for the screws to avoid splitting the frame, especially if the frame is made of wood or uPVC.
Next, attach the side tracks. These should run vertically from the cassette to the bottom of the opening. Check that they are plumb. A small spirit level helps here. If the tracks are out of alignment, the mesh will rub against one side and wear out faster. Once the tracks are fixed, slide the bottom bar of the mesh into the tracks. The bottom bar usually has a handle or a pull tab. Pull it down gently until the mesh is fully extended and the bottom bar clicks into a latch at the sill. The mesh should be taut, not sagging, but also not stretched so tight that it warps the frame.
Watch for the mesh catching on any sharp edges in the tracks. If you feel resistance, stop and check for a burr or a piece of debris. A damaged mesh will not stop insects, and a small tear can become a large one over time. Lubricate the tracks with a silicone spray if they feel sticky, but never use oil-based lubricants: they attract dust and dirt, which will clog the tracks.
Step 4: Test the Seal and Tension
Once the screen is fitted, close the window or door. Look for light gaps around the edges. Hold a piece of paper against the seal: if the paper can slide through, so can a fly. Adjust the side tracks or the cassette if needed. Some systems have adjustable tension on the spring. If the mesh feels too loose, increase the tension by turning the adjustment screw on the cassette. If it is too tight, reduce it. The goal is a smooth action when you pull the screen down and when you retract it.

Test the screen with the window open. Open the window fully and then extend the flyscreen. Check that the screen does not interfere with the window's movement. If the window hits the screen frame, you may need to reposition the cassette further inside the opening. This is a common issue with windows that open outward. In that case, you might need a different type of screen that mounts on the inside of the frame.
Step 5: Maintain the Screen for Long Life
Retractable flyscreens require very little maintenance, but a few simple checks keep them working well. Once a season, wipe the mesh with a damp cloth to remove dust and pollen. Dust can block the mesh and reduce airflow. Check the tracks for debris, especially after a storm. If leaves or twigs get into the tracks, they can stop the screen from closing fully. Do not use a vacuum cleaner on the mesh unless the mesh is very sturdy; the suction can distort the fibres. A soft brush works better.
In winter, you might want to retract the screen completely and store the bottom bar in the cassette. Most systems allow you to do this, and it protects the mesh from snow and ice. If you leave the screen extended, check that ice does not form on the mesh. Ice adds weight and can stretch the spring. If you notice the mesh is not retracting smoothly, the spring tension may need adjusting. That is a simple job if your screen has an accessible tension screw. If not, a professional can handle it.
For homes with pets or small children, the mesh is generally safe. It is not sharp, and it is not made of materials that splinter. But a cat's claws can tear some meshes. Fibreglass mesh is more resistant to claws than polyester. If you have an active pet, check the screen regularly for small holes. A small tear can be repaired with clear silicone sealant, but a large tear means replacing the mesh panel.
Why Retractable Flyscreens Beat Fixed Screens
Fixed screens are fine for windows you never open, but most people want the option to have an unobstructed view. A retractable screen rolls out of sight when you do not need it. That means you can enjoy an open window at night, when mosquitoes are most active, and retract the screen during the day for a clear view. It also means you can clean the glass easily without removing a screen. For doors, a retractable screen is even more useful: you can leave the door open for ventilation and still keep insects out. The screen does not get in the way of daily traffic because it rolls up neatly when not in use.
Pesticide free protection is another reason to choose these screens. Instead of spraying chemicals or using plug-in repellents, you create a physical barrier. That is safer for children, pets, and beneficial insects like bees and butterflies. The screen does not kill insects; it simply keeps them outside where they belong. This approach is especially important for people with allergies or asthma, as chemical sprays can trigger respiratory problems.

Putting It All Together
Keeping flies and mosquitoes out while the windows are open comes down to one thing: a properly fitted, well-maintained insect barrier. The steps are straightforward: measure the opening carefully, choose a mesh that suits your local insect population, fit the frame and tracks with attention to level and plumb, test the seal, and maintain the screen through the seasons. Each step has its own pitfalls, but they are all avoidable with a little patience. The result is a home that breathes naturally, without the buzz of wings or the itch of bites.
For anyone who wants a custom fit without the hassle of DIY measurements going wrong, suppliers like gozito.co.uk offer made to measure retractable flyscreens that take the guesswork out of the process. The screen arrives sized to your opening, so you can focus on the installation steps and enjoy the results. With a good screen in place, you can leave the windows open all summer and never worry about what is flying in.
❧